Advertisement
6.
When there is incoming call, if want to adjust the volume, the user can adjust the volume from voice button
on the cellular phone. (Fig.5)
7.
When getting off from the car (Fig.6), remove the phone cable from cellular phone and press the release
key on the holder to take the cellular phone out if there is Holder Option.
Volume
Button
Caution:
1.
If you use 08A40-51D112N (Motorola LF-2000, V3688, V8088, P7689......etc) phone cable, before using
Hands-Free, please turn off cellular phone and then put phone cable plug in cellular phone, after cellular
phone shows "charging condition" and hearing "Du..." sound, turn on the cellular phone "Power" button.
Before leave your car, please turn off "ACC" and then pull out phone cable. Some cellular phones "Power"
will be Off, it is normal.
2.
If you feel the incoming call ring sound pressure is too high or too low, you may set cellular phone to adjust
volume level. Please read cellular phone owner's manual.
3.
The product is seriously tested by quality assurance. The quality of communication is in good condition. But
there might be the influence by environmental noise, wind and engine during the car movement.
Fig.5
Fig.6
– 2 –
Fig.7
Release
Button
Advertisement
