Encode Tab; Livewire; File Transfer - Omnia ONE FM Installation And Operation Manual

Encode Tab

Clicking on the "Encode" tab
will display all of the controls
for the OmniaONE's built-in
Stereo Generator (encoder) in
the main applet screen..
Adjustment of the controls
works the same way as
described above in the
Processing Tab section.

Livewire

Configuration of the OmniaONE's Livewire port is accomplished in the Livewire menu. Click on the "Livewire"
link option from the top menu or "Livewire Configuration" form the Main Menu.
The following screen will appear:
In the "Output from Omnia ONE" section, the output Livewire stream can be named, the Livewire channel to be
used is assigned and the Livewire output stream mode is selected. The Livewire output can also be disabled here.
In the "Input to Omnia ONE" section, the channel from your Livewire system to be input to the OmniaONE is
selected. The Mode: dropdown box should normally be left at the default setting: "From source".
Full explanation of the Livewire terminology used here is beyond the scope of this manual.
Please refer to your Axia Livewire system documentation for full information.

File Transfer

The File Transfer menu allows you to save and load User Presets and I/O Configurations to and from your
computer.
From the top menu in the Remote screen, click "File Transfer" or from the Main Menu, click the "User file transfer"
option.
53