American Standard Retrospect 3111.216 Specifications

RETROSPECT ® COLLECTION
ROUND FRONT TOILET
❑
2408.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl with fully
glazed 2" trapway
• AquaForce fl ushing technology
• Antique Chrome trip lever
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory fl ush tested
• Design coordinated to Retrospect
Collection Sinks
❑
3111.216 Bowl
❑
4393.016 Tank
Nominal Dimensions:
768 x 486 x 794mm
(30-1/4" x 19-1/8" x 31-1/4")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specifi ed:
❏ Color:
❏ Seat: American Standard #5322.011 "Rise and
Shine" solid plastic, closed front, round front seat
with cover.
❏ Alternate Seat: American Standard #5308.014
"Laurel" molded closed front seat with cover.
❏ Supply with stop:
© 2006 American Standard Inc.
RETROSPECT
FINISHED WALL
768mm
(30-1/4)
25mm ± 6mm
(1 ± 1/4)
216mm (8-1/2")
C/L OF SEAT POST HOLES
140mm (5-1/2) CENTERS
444mm
(17-1/2)
90mm
(3-9/16")
344mm
(13-9/16)
13mm
(1/2)
159mm
(6-1/4)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K41
®
COLLECTION
ROUND FRONT TOILET
VITREOUS CHINA
(19-1/8)
406mm
(16)
SUPPLY AS
REQUIRED
381mm
(15)
*
222mm
(8-3/4)
*
152mm
(6)
FINISHED
FLOOR
486mm
C/L
794mm
(31-1/4)
279mm
(11)
Revised 5/05