Download Print this page
American Standard Retrospect Collection Right Heigh Elongated Toilet 3264.216 Specifications

American Standard Retrospect Collection Right Heigh Elongated Toilet 3264.216 Specifications

American standard retrospect collection right height elongated toilet specification sheet

Advertisement

Quick Links

RETROSPECT
COLLECTION ELONGATED
®
RIGHT HEIGHT™ TOILET
2405.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl with fully
glazed 2" trapway
• 16-3/4" rim height for accessible application
• AquaForce flushing technology
• Antique Chrome trip lever
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory flush tested
• Design coordinated to Retrospect
Collection Sinks
3264.216 Bowl
4393.016 Tank
Nominal Dimensions:
768 x 486 x 838mm
(30-1/4" x 19-1/8" x 33")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimension
To Be Specified:
❏ Color: ❏ White
❏ Seat: American Standard #5324.019 "Rise and
Shine" solid plastic closed front, elongated seat
with cover.
❏ Alternate Seat: American Standard #5311.012
"Laurel" molded closed front seat with cover.
❏ Supply with stop:
© 2008 AS America Inc.
RETROSPECT
RIGHT HEIGHT™ ELONGATED TOILET
FINISHED WALL
25 ± 6mm (1 ± 1/4")
768mm
(30-1/4")
214mm
(8-7/16")
C/L OF SEAT POST
MTG HOLES ON
140mm (5-1/2") CTRS
90mm
(3-9/16")
389mm (15-5/16")
168mm (6-5/8")
305mm
C/L OF OUTLET AND
(12")
TOILET MTG BOLTS
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
K48
COLLECTION
®
494mm
(19-7/16")
C/L OF SUPPLY
AS REQUIRED
*
203mm
(8")
13mm (1/2")
FINISHED
FLOOR
VITREOUS CHINA
486mm
(19-1/8")
C/L
400mm
838mm
(15-3/4")
(33")
425mm
(16-3/4")
273mm
(11-5/8")
*
152mm (6")
Revised 2/08

Advertisement

loading

This manual is also suitable for:

Retrospect right height 2405.016Retrospect right height 4393.016