Related Manuals for Marmitek Gigavideo800 HDMI
Summary of Contents for Marmitek Gigavideo800 HDMI
- Page 1 GIGAVIDEO800 GIGAVIDEO800 HDMI Wireless HD Audio/Video sender USER MANUAL GEBRAUCHSANLEITUNG GUIDE UTILISATEUR MODO DE EMPLEO MANUALE D’ISTRUZIONE GEBRUIKSAANWIJZING 20301/20090316 • GIGAVIDEO800 HDMI © ALL RIGHTS RESERVED MARMITEK...
- Page 2 GIGAVIDEO800 HDMI™...
-
Page 3: Safety Warnings
• Do not expose the components of your systems to extremely high temperatures or bright light sources. • In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. - Page 4 HD devices and it will transmit all infrared commands received by the IR sensor extender cable. Note: IR blaster only supports 38kHz (NEC) and 36kHz (RC5 & RC6) infrared remote protocols. Some devices may not be supported. GIGAVIDEO800 HDMI™...
- Page 5 Switching time between two source could be approximately 15 ~ 20 seconds. If video from YPbPr component source device appears but dim, than press the 3 or 4 YPbPr button repeatedly on the remote to fine-tune picture performance. © MARMITEK...
-
Page 6: Power Led
LED status LED blinking number # 32 5160 # 36 5180 # 40 5200 # 44 5220 # 48 5240 3. Exit the wireless RF channel adjustment mode There is no button on the remote pressed about 10 seconds. GIGAVIDEO800 HDMI™... -
Page 7: Technical Data
For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. © MARMITEK...
Need help?
Do you have a question about the Gigavideo800 HDMI and is the answer not in the manual?
Questions and answers