Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
M229 BASE STATION INSTALLATION
STEP1:
Connect 2 wires to the DR1 screw connection for the door camera (no polarity. Use a 2-ply cable:
1,0 mm
for distances up to 100 m). Then connect the power adapter to the DC power adapter
2
connection [3] (+ = red, - = black). Do NOT connect the power adapter to the mains. Place the
base station onto the wall plate.
4
2 wires
Connect the wiring for the doorunit to terminal DR1 (no
polarity)
To AC outlet: do not connect yet.
2 wires to connect the Lock
Release Control (if available)
© MARMITEK
Advertisement
Table of Contents
