Marmitek M229 Owner's Manual page 13

EX-229H OPERATION SLAVE MONITOR
1. Visitor calls from door unit
• Operation similar to the Base Station M229.
• Right LED indicates other House Unit (Base or
Slave) is online with the door unit.
• When a visitor calls, any House Unit (Base or
Slave monitor) will disconnect other Monitor Units
when the handset is picked up.
• In the above situation other House Units (Base or
Slave) can join the conversation by pressing the
Monitoring Button (12).
• In the above situation you can invite other House
Units to join the conversation by pressing the left
button (10)
2. Monitoring Audio and Video without
picking up the handset.
• Operation similar to the Base Unit M229
• Press the right button (12) 1, 2, 3 of 4 times to
select the desired camera.
• The number of cameras to choose from depends
on the number of cameras activated on the Base
Unit M229 (max. 4 cameras).
• If more than one Monitor is set for monitoring,
camera selection is controlled by the Base Unit
M229.
3. Intercom function
• Pick up Handset, press and hold the left button (10). A Call Beep can be send to all connected
House Units (both Base and Slave).
• Release the left button if anyone answers by picking up the handset. There is now an intercom
connection between the two House Units.
Call
Beep
M229
™
Call Beep
ENGLISH
Hello
13