Advertisement
User Manual
English
Installation
Before starting the installation, please ensure that all the equipment to be used (PCs,
monitor, speakers etc.) are switched off.
2 PCs – one monitor:
Connect video monitor/VGA signal sources from PC/notebook or other standard VGA
output to the corresponding ports of the VGA switch using a VGA cable (HD-15 Male /
HD-15 Male) and the Audio sources to Audio inputs using a Stereo Audio cable (3.5mm
Male / 3.5mm Male).
Connect the VGA output of the switch to your monitor using a VGA cable (HD-15 Male /
HD-15 Male) and then connect the Audio output to your speakers using a Stereo Audio
cable (3.5mm Male / 3.5mm Male).
2 monitors – 1 PC:
Connect video monitor/VGA signal sources from your monitors to the corresponding
ports of the VGA switch using a VGA cable (HD-15 Male / HD-15 Male) and the Audio
sources to Audio inputs using a Stereo Audio cable (3.5mm Male / 3.5mm Male).
Connect the VGA output of the switch to your PC using a VGA cable (HD-15 Male / HD-
15 Male) and then connect the Audio output to your speakers using a Stereo Audio
cable (3.5mm Male / 3.5mm Male).
Turn on all the connected equipment. The installation is now complete.
Push front panel push button to switch to different channels. If there is only one channel
activated, the other button will be inactive.
3
Advertisement
