Automatic Recipes; Automatic Programmes With Weight Input - Electrolux EOC5741AO User Manual

14 www.electrolux.com
• Automatic programmes with the core
temperature sensor
8.2 Automatic programmes
Programme number
You can find the recipes for the
automatic programmes specified
for this appliance on our website.
To find the proper Recipe Book
check the PNC number on the
rating plate on the front frame of
the appliance cavity.

8.3 Automatic recipes

Setting an automatic recipe:
1. Activate the appliance.
2.
Touch
number of the automatic programme
(P1 – P9).
3.
Touch
matic recipe.
4.
Touch
activates automatically after five sec-
onds.
5.
When the set time ends, an acoustic
signal sounds for two minutes. The
symbol
activates.
6.
Touch a sensor field or open the door
to stop the acoustic signal.
8.4 Automatic programmes with
weight input
If you set the weight of the meat, the ap-
pliance calculates the roasting time.
1. Activate the appliance.
1
2
3
4
5
6
7
8
9
. The display shows the
or to choose the auto-
or the automatic recipe
flashes. The appliance de-
Programme name
ROAST BEEF
ROAST PORK
CHICKEN, WHOLE
PIZZA
MUFFINS
QUICHE LORRAINE
WHITE BREAD
POTATO GRATIN
LASAGNE
2.
Touch .
3.
Touch or
programme (refer to the "Recipe
book").
The display shows: the cooking time,
the duration symbol
weight, a unit of measurement (kg, g).
4.
Touch or the settings save auto-
matically after five seconds.
5. The appliance activates. A symbol of
the weight unit flashes in the display.
During this time you can change the
default weight value with
Touch .
6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.
7. Touch a sensor field or open the door
to stop the acoustic signal.
8.5 Automatic programmes with
the core temperature sensor
The core temperature of the food is de-
fault and fixed in programmes with the
core temperature sensor. The programme
ends when the appliance is at the set
core temperature.
1. Activate the appliance.
2.
Touch .
3. Install the core temperature sensor
(refer to "The core temperature sen-
sor").
to set the weight
, a default
or .