Pro-Form PFTL99612.0 User Manual page 12

10. With the help of a second person, hold the con-
sole assembly near the Left and Right Uprights
(88, 89).
Connect the Upright Wire (77) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Remove the wire tie from the Upright Wire (77).
11. Insert the Upright Wire (not shown) into the Left
Handrail (22) as you set the console assembly
on the Left and Right Handrails.
Attach the console assembly with four 5/16" x
5/8" Screws (4) and four 5/16" Star Washers
(11). Start all four Screws, and then tighten
them.
Tighten four #8 x 3/4" Screws (2) into the bottom
of the Pulse Bar Bottom (87). Then, tighten the
four 5/16" x 5/8" Screws (4).
10
89
11
11
87
2
4
4
12
Console
Assembly
77
Console
Wire
88
Wire
Tie
Console
Wire
77
Console
Assembly
2
11
2
4
22
4