Pro-Form PFTL99612.0 User Manual page 10

6. Orient the Handrail Brackets (15) so that the
bend in the Brackets is positioned as shown.
Insert the Upright Wire (77) through the left
Handrail Bracket.
Attach the Handrail Brackets (15) to the Uprights
(88, 89) with four 3/8" x 1" Flat Head Screws
(5) and four 3/8" Star Washers (13). Tighten the
Screws.
7. Hold the left handrail assembly (B) near the Left
Upright (88). Insert the Upright Wire (77) into the
large hole in the bottom of the left handrail, and
pull it out of the front of the left handrail.
Slide the left handrail assembly (B) onto the left
Handrail Bracket (15), and attach the left hand-
rail with two 5/16" x 5/8" Screws (4) and two
5/16" Star Washers (11). Do not tighten the
Screws yet.
Attach the right handrail assembly (C) as
described above. Note: There is not a wire in
the Right Upright (89).
6
5
15
77
13
Bend
88
7
77
B
11
4
15
11
4
88
10
5
15
13
Bend
89
C
15
11
4
11
4
89