Switching Display Mode Automatically - Honda 2010 Accord Crosstour Owner's Manual

System Setup

Switching Display Mode Automatically

I
llumination control
Display Mode button
(see page 11)
Dash illumination adjustment
knob (see your Owner's
Manual for location)
Headlights (Auto/On/Off)
Map Day/Night screen color
choice (see page 99 for the
Day and Night color choices)
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see your Owner's Manual for location of knob).
• With the headlights off, select mid-range for the dash illumination (see your Owner's Manual for location of knob).
• On the SETUP Color adjustment screen, choose white for the map Day display and black for the map Night display (see page 99).
Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
NOTE:
See your Owner's Manual for additional information regarding the dash brightness adjustment.
100 Navigation System
Priority Operation
1 Allows selection of Day, Night, or Off display
mode. Press this button to display the
Brightness control. When the Brightness control
is displayed, pressing this button switches to the
Day, Night, or Off display mode.
This button has the highest priority for the
display control adjustments.
2 When headlights are turned on, and you wish to
have the Day display mode, then adjust the
illumination to the full bright setting (beeps).
3 When turned on (or off), the display changes to
Night (or Day) display mode. By using
Display Mode button
Day/Night mode independently.
N/A The user can select the color of the screen that
will be displayed for the Day and Night
display modes described above.
2010 Accord Crosstour
But remember
—
With the headlights on, adjust the dash
brightness back to mid-range to allow auto
switching by sensing the headlights are on or off.
Use the Display Mode button
the headlights on, adjust the dash illumination
, adjust brightness to full bright to set the display to your desired
choice.
For best contrast, ensure that the map color is
white for Day and black for Night.
, or with