Table of Contents
Advertisement
System Setup
Switching Display Mode Automatically
llumination control
Display Mode button
(see page 10 )
Sunlight sensor (middle of dash
near the windshield, see the
vehicle Owner's manual for
location)
Dash illumination adjustment
knob (see the vehicle Owner's
manual for location)
Headlights (Auto/On/Off)
Map Day/Night screen color
choice (see page 114 for the
Day and Night color choices)
Recommended Display Mode Day/Night settings:
• With the headlights on, select mid-range for the dash illumination (see the vehicle Owner's manual for location of knob).
• With the headlights off, select mid-range for the dash illumination (see the vehicle Owner's manual for location of knob).
• On the SET UP "Color" adjustment screen, choose white for the map Day display and black for the map Night display (see
page 114 ). Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
NOTE:
See the vehicle Owner's manual for additional information regarding the dash brightness adjustment.
116 Navigation System
Priority Operation
1
Allows selection of Day, Night or Off display
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
2
If the sunlight sensor detects daylight and
the headlights are turned on, the system
automatically overrides (cancels) the Night
display and displays the Day display mode.
3
When headlights are turned on, and you wish
to have the Day display mode, then adjust the
illumination to the full bright setting (beeps).
4
When turned on, the display changes to Night
display mode. The previous two controls listed
above can cancel this function.
N/A
The user can select the color of the screen
that will be displayed for the Day and Night
display modes.
But remember
When the car is restarted, the display mode
previously selected by this button is canceled
and is determined by one of the controls
below.
If desired, use the Display Mode button
to override this automatic choice.
With the headlights on, adjust the dash
brightness back to mid-range to allow auto
switching by sensing whether the headlights
are on or off.
Use the Display Mode button,
the headlights on, adjust the dash illumination
to full bright to set the display to your desired
choice.
For best contrast, ensure that the map color is
white for Day and black for Night.
or, with
Advertisement
Table of Contents
