Switching Display Mode Automatically - Honda Pilot Navigation Manual

2009
Hide thumbs Also See for Pilot:
Table of Contents

Advertisement

Switching Display Mode Automatically

I
llumination control
Display Mode button
(see page 11)
Sunlight sensor (see the
vehicle Owner's manual for
location)
Dash illumination adjustment
knob (see the vehicle Owner's
manual for location)
Headlights (Auto/On/Off)
Map Day/Night screen color
choice (see page 98 for the
Day and Night color choices)
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see the vehicle Owner's manual for location of knob).
• With the headlights off, select mid-range for the dash illumination (see the vehicle Owner's manual for location of knob).
• On the SETUP Color adjustment screen, choose white for the map Day display and black for the map Night display (see
page 98). Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
Priority Operation
1
Allows selection of Day, Night, or Off display
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
2
If the sunlight sensor detects night-sky light
and the headlights are turned on, the system
automatically overrides (cancels) the Day
display and displays the Night display mode.
3
When headlights are turned on, and you wish to
have the Day display mode, then adjust the
illumination to the full bright setting (beeps).
When turned on, the display changes to Night
4
display mode. The previous three controls
listed above can "cancel" this function.
N/A
The user can select the color of the screen that
will be displayed for the Day and Night
display modes described above.
System Setup
But remember
Once you press this button, you assume full
manual control of the display mode until the
ignition key is cycled again.
If desired, use the Display Mode button
to override this automatic choice.
With the headlights on, adjust the dash
brightness back to mid-range to allow auto
switching by sensing the headlights are on or
off.
Use the Display Mode button
the headlights on, adjust the dash illumination
to full bright to set the display to your desired
choice.
For best contrast, ensure that the map color is
white for Day and black for Night.
Navigation System
, or with
99

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2009 pilot navigation system

Table of Contents