Viewing/Saving The Current Location - Honda 2010 Accord Crosstour Owner's Manual

Viewing/Saving the Current
Location
Whenever you are on a map screen, you
can always obtain your current location
either by pushing in on the Interface
Dial, selecting Show Icon on Map,
and selecting Current Location, or by
using the voice control system and
saying "Display current location." A
screen pops up which shows the address
of your current location, as well as the
latitude, longitude, and elevation.
NOTE:
The elevation will not appear when the
system is temporarily lacking proper
GPS information. The system elevation
may not agree with elevations shown on
roadside elevation signs, and may
fluctuate plus or minus 100 feet or more.
You can store the current location for
later use. It does not change or cancel
your current route.
For example, you are following the
system's directions to get to a
destination. While sitting at a stoplight
you notice a store on the corner, but do
not have time to visit it right now. You
can save the location to select as a
destination at a later date.
2010 Accord Crosstour
Driving to Your Destination
To save the location, say "Save current
location" or select Save on the Current
location screen. When you select "User
1" or "User 2", the Edit address book
screen with the current location data
will appear. You can edit the name,
phone number, or category name to be
saved in your personal Address Book.
After the location is saved, select
Return to return to the map screen.
You can then use Address Book from
the MENU screen (Enter destination
by) to select the saved location and
return to the same spot.
Navigation System 63