Are Marked "Left" And "Right - NordicTrack NTL89011.0 User Manual

11. Identify the Left and Right Trays (95, 96), which

are marked "Left" and "Right."

Attach the Trays (95, 96) to the Console Base
(98) with eight #8 x 1/2" Screws (1). Note: It may
be easier to start the two inside Screws and then
slide the Trays into place before tightening the
other six Screws.
Note: It may be necessary to rotate the Console
Frame (101) upward when attaching the Trays
(95, 96).
12. IMPORTANT: To avoid damaging the Pulse
Crossbar (81), do not use power tools and do
not overtighten the #10 x 3/4" Screws (4).
Orient the Pulse Crossbar (81) as shown. Attach
the Pulse Crossbar to the Handrails (79) with
four #10 x 3/4" Screws (4) and four #10 Star
Washers (5). Start all four Screws, and then
tighten them.
Make sure that the Upright Wire (91) isn't
pinched. Firmly tighten the four 5/16" x 2 3/4"
Screws (12).
11
96
1
1
12
91
4
5
79
12
12
101
1
95
1
98
1
4
79
12
81
5