Table of Contents
Advertisement
M S-7260 M ainboard
On-Chip IDE Controller
This item allows you to enable/ disable IDE Controller.
Serial-ATA Devices
These items allow users to enable or disable the SATA controller.
I/O Devices
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard Floppy Controller
Select [Enabled] if your system has a floppy disk controller (FDD) installed on the
system board and you wish to use it. If you install add-on FDC or the system has
no floppy drive, select [Disabled] in this field.
COM Port 1/2
Select an address and corresponding interrupt for the first serial port.
COM Port 2 Mode
This setting allows you to specify the operation mode for serial port 2. Settings
are:
[IrDA]
[ASKIR]
Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides
Standard, ECP, and EPP features. It has the following options:
[Disabled]
[3BC]
[278]
[378]
Parallel Port M ode
[SPP]
[EPP]
[ECP]
[ECP + EPP]
3-14
IrDA-compliant Serial Infrared Port
Amplitude Shift Keyed Infrared Port
Line Printer port 0
Line Printer port 2
Line Printer port 1
Standard Parallel Port
Enhanced Parallel Port
Extended Capability Port
Extended Capability Port + Enhanced Parallel Port
Hide quick links:
Advertisement
Table of Contents
