Rebuilding A Raid Array - MSI MS-7260 User Manual

M S-7260 M ainboard

Rebuilding a RAID Array

Rebuilding is the process of restoring data to a hard drive from other drives in the
array. This applies only to fault tolerant arrays such as RAID 1 and RAID 0+1. For
example, assuming you have a two disk RAID 1 array, and one of the drives fail, then
you need the lost data on the newly added drive.
Rebuilding Instructions
After creating a mirrored array, you can rebuild the array using the following steps:
1. Go to W indows and run the NVIDIA RAID Management utility.
The picture below shows an example of a system with one mirrored array and two
free disks.
2. Right-click on Mirroring. The popup menu appears.
3. From the popup menu, click Rebuild Array. The NVIDIA Rebuild Array W izard
appears.
B-22