Important Notification About Power Issue - MSI MS-7260 User Manual

Hardware Setup

Important Notification about Power Issue

NForce chipset is very sensitive to ESD (Electrostatic Discharge), therefore this
issue mostly happens while the users intensively swap memory modules under S5
(power-off) states, and the power code is plugged while installing modules. Due to
several pins are very sensitive to ESD, so this kind of memory-replacement actions
might cause system chipset unable to boot. Please follow the following solution to
avoid this situation.
Unplug the AC power cable (shown in figure 1) or unplug the ATX2 & JPW 1 power
connectors (shown in figure 2 & figure 3) before the 1st installation or during system
upgrade procedure.
Figure 1:
Unplug the AC power cable
Figure 2:
Figure 3:
Unplug the ATX2 power conn.
Unplug the JPW1 power conn.
2-9