Advanced Bios Features - MSI MS-7260 User Manual

Advanced BIOS Features

Quick Booting
Setting the item to [Enabled] allows the system to boot within 5 seconds since it will
skip some check items.
Full Screen LOGO Display
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled]
[Disabled]
Boot Up NumLock LED
This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]
will allow users to use the arrow keys on the numeric keypad.
Boot To OS/2
This allows you to run the OS/2
W hen you choose [No], you cannot run the OS/2
larger than 64MB. But it is possible if you choose [Yes].
IOAPIC Function
This field is used to enable or disable the APIC (Advanced Programmable Interrupt
Controller). Due to compliance with PC2001 design guide, the system is able to run in
APIC mode. Enabling APIC mode will expand available IRQ resources for the system.
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.
®
operating system with DRAM larger than 64MB.
BIOS Setup
®
operating system with DRAM
3-9