Automatic Operation - Hitachi RAS-24G1R Instruction Manual

AUTOMATIC OPERATION

I The device will automatically determine the operation mode either COOL or DEHUMIDIFY, depending
on the initial room temperature.
HITACHI
°C
I You can slightly adjust the room temperature.
HITACHI
°C
I CONDITION OF AUTOMATIC OPERATION
The selected mode of operation will not change during the operation even though the room
G
temperature change.
INITIAL ROOM
TEMPERATURE (APPROX.)
Over 27°C
16 ~ 27°C
1
Press the
G Operation start with a "beep".
Press the
STOP
G Please make sure you have been selected the
by use the
G
The fan speed selector does not work at this operation.
1
Press the
G Temperature setting change by 1°C for each 1 time press.
Up
°C
Down
G
You can raise or lower the temperature setting by a maximum of
3°C.
G The display does not indicate the preset temperature in the Automatic
mode. Device will receive the setting by a "beep".
TEMPERATURE
FUNCTION
COOL
Slightly lower than the
DEHUMIDIFY
room temperature
– 7 –
(START/STOP) button
(START/STOP) button
(FUNCTION) Button.
°C
(ROOM TEMPERATURE) button
SETTING
HIGH at start, LOW after
the preset temperature is
27°C
reached
(Automatic) mode
FAN SPEED
QUIET