Timer Reservation - Hitachi RAS-24G1R Instruction Manual

TIMER RESERVATION

I ON Timer and OFF Timer are available.
OFF Timer Reservation
1
OFF TIME setting
G
Select the OFF TIME by pressing the
Button.
G
Setting time will change according to the below
sequence when you press the button.
0.5 hour interval
0 . 5 1 . 0 1 . 5
G The value change quicker if you keep pressing the
button.
2
Press the
G OFF TIMER reserved with a signal received sound
"beep".
o
G
The (OFF) Mark starts lighting instead of blinking.
ON Timer Reservation
1
ON TIME setting
G
Select the ON TIMER by pressing the
Button.
G
At the beginning of setting, time 6 hours was set.
G Setting time will change according to the below
sequence.
0.5 hour interval
0 . 5 1 . 0 1 . 5
G
The value change quicker if you keep pressing the
button.
2
Press the
G
ON TIMER reserved with a signal received sound
"beep".
G The (ON) Mark starts lighting instead of blinking.
CANCELLATION of Timer Reservation
1
Press the
G
As the time settings are stored in remote controller
memory, you only have to press the
button in order to use the same setting next time.
1 hour interval
9 . 5 10 11
(Reserve) button
1 hour interval
9 . 5 10 11
(Reserve) button
(Cancel) button
– 11 –
I Operation stop at setting time
(OFF)
12
I Operation will start for setting
(ON)
temperature at setting time (The starting
time may different depend on the room
temperature and set temperature).
12
(Reserve)
HITACHI
Hr.
Hr.
°C
HITACHI
Hr.
Hr.
°C
HITACHI
Hr.
°C
HITACHI
Hr.
°C