Names And Functions Of Remote Control Unit - Hitachi RAS-24G1R Instruction Manual

NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT

I This controls the operation function and timer setting of the room air conditioner. The range of
control is about 4 meters. If indoor lighting is controlled electronically, the range of control may be
shorter.
ON/OFF Button
Press this button to start operation.
Press it again to stop operation.
FUNCTION Button
Select the operation mode.
( Page 10)
SLEEP Button
Use this button to set the sleep
timer. ( Page 8)
Reserve Button
Timer setting reservation.
OFF TIMER Button
Select the turn OFF time.
ON TIMER Button
Select the turn ON time.
Precautions for Use
G
Do not put the remote controller in direct
sunlight and high temperature.
G
Do not drop it on the floor, and protect
it from water.
G
If you press the FUNCTION selector
button during operation, the air
conditioner may stop for about 3 minutes
for protection before you can start it
again. (unless you turn off and on again
the power source)
Signal Transmission
HITACHI
C ˚
Hr.
°C
You can use the remote controller by fixing it on the
wall with the accessory parts.
G
Before fixing it,
make sure the
unit can
controlled by the
remote control
unit at the fixing
position.
– 6 –
Transmission Sign
The transmission sign blinks
when a signal has been send.
TEMPERATURE Button
Room temperuture setting.
Value will change quicker when
keep pressing.
( Page 7)
FAN SPEED Button
Select the fan speed for
cooling and circulation mode.
( Page 10)
AUTO SWING Button
Control the angle of the
horizontal air deflector.
( Page 12)
CANCEL Button
Cancel timer reservation.
HOLDER
be
REMOTE
CONTROLLER