Speaker Connections - Harman Kardon SUB-TS7 Service Manual

SUB-TS7/TS8

SPEAKER CONNECTIONS

Dolby* Digital or DTS
Digital Surround Mode) Connection
USE THIS INSTALLATION METHOD FOR
DOLBY DIGITAL, DTS OR OTHER DIGITAL
SURROUND PROCESSORS:
Use the line-level input jack marked SUB
∞ for the Low-Frequency Effects channel.
Connect this jack to the subwoofer output
or LFE output on your receiver or amplifier.
Connect each speaker to the corresponding
speaker terminals on your receiver or
amplifier.
Make sure you've configured your surround
sound processor for "Subwoofer On. " The
front left, front right, center and surround
speakers should all be set to "Small. "
When all connections have been made, plug
the AC power cord on the subwoofer into
an AC outlet.
10 SPEAKER CONNECTIONS
® (or Other
Front
Left
Surround
Left
Center
Subwoofer
LINE LEVEL IN
SUB R
Front
Left
SUB/LFE
Out
Surround
Left
Center
Surround Back
Receiver
Surround
Back
6
harman/kardon
Front
Right
L
Front
Right
Surround
Right
Surround
Right