Specifications - Hitachi C 6SS Technical Data And Service Manual

1. Specifications

Model
Saw blade diameter
at 90°
Cutting depth
at 45°
Power source
Type of motor
Type of switch
Housing
Handle cover
Enclosure Lower guard
Gear cover
Base
1
* Voltage (V)
1
* Current (A)
Power input
No-load Rotation speed
Aluminum
2
*
base
Net
Steel base
Weight
Aluminum
base
Gross
Steel base
Packaging
Type
Cord
Overall length
Standard equipment
1
* Check the tool name plate to confirm the rating, as it is subjected to change by area.
2
* The net weight does not include the cord and the saw blade.
SPECIFICATIONS
C 6SS
165 mm (6-1/2")
0 to 57 mm (0 to 2-1/4")
Max. 38 mm (1-1/2")
AC single phase 50/60 Hz
AC single phase commutator motor
Cast aluminum / Sheet steel
110 120
9.6 9.2
1,010W
5,600/min. 5,900/min.
3.2 kg (7.1 lbs.)
3.1 kg (6.8 lbs.)
4.0 kg (8.8 lbs.)
3.9 kg (8.6 lbs.)
Corrugated cardboard box / Plastic case and corrugated cardboard sleeve
Tungsten carbide tipped (TCT) saw blade ------------------------------------- 1
Parallel guide -------------------------------------------------------------------------- 1
Hex. bar wrench ---------------------------------------------------------------------- 1
Case (GBR only) ----------------------------------------------------------------------1
-2-
190 mm (7-1/2")
0 to 68 mm (0 to 2-11/16")
Max. 46 mm (1-13/16")
Trigger switch
Polycarbonate resin
Cast aluminum
220
5.0
1,050W
5,950/min.
3.4 kg (7.5 lbs.)
3.3 kg (7.3 lbs.)
4.3 kg (9.5 lbs.)
4.2 kg (9.3 lbs.)
Two-core cabtire cable
2 m (6.6 ft.)
C 7SS
230 240
4.8 4.6
5,650/min.