Selecting Language; Rinse Aid - Siemens Dishwasher Instructions For Use Manual

aus

Selecting language

The language in the display window
can be set from
is the factory setting.
Language
Deutsch
English
Français
Nederlands
Italiano
ÅËËÇÍÉÊÁ
Español
Português
Svenska
Norsk
Suomi
Dansk
Türkçe
PYCCŽÅœ
Polski
Èeš.
Magyar
Croatian
Slovenian
To change the language:
Open the door.
Switch on ON/OFF switch
Hold down programme button
and press START button
digital display
3
Release both buttons.
Press programme button
the factory set value
on the digital display
"Deutsch" is indicated in the display
window .
11
Press programme button
Each time the button is pressed,
the set value increases by 1; after
, the setting goes back to
Press START button
The set value is saved.
Close the door.
6
11
to . "Deutsch"
Setting
L:01
L:02
L:03
L:04
L:05
L:06
L:07
L:08
L:09
L:10
L:11
L:12
L:13
L:14
L:15
L:16
L:17
L:18
L:19
.
1
A
until the
9
is indicated.
until
A
is indicated
.
3
.
C
.
.
9

Rinse aid

As soon as the rinse-aid refill indicator
lights up on the control panel,
5
refill with rinse aid.
The rinse aid is required for stain-free
utensils and clear glasses.
Use only rinse aid for domestic dish-
washers.
Combined detergents with rinse-aid com-
ponent may be used up to a water hard-
ness of 21 _dH (37 _fH, 26 _Clarke,
3,7 mmol/l) only. If the water hardness
is over 21 _dH, rinse-aid must be used.
Open the dispenser
and lifting the plate on the cover.
Carefully pour rinse aid up to the max.
mark in the filler opening.
Close cover until it clicks shut.
To prevent excessive foam formation
during the next rinse cycle, remove
any rinse aid which has run over with
a cloth.
by pressing
28