Disassembly Instructions - Inlet Valve; Disassembly Instructions - Door; Removing Method Of Remained Water - LG WD14030RD Service Manual

INLET VALVE
DOOR
1 Disconnect the wiring connector.
2 Remove the valve by two screws of the valve
holder.
When reconnecting the connector
VALVE (PRE)
1
2
VALVE (MAIN)
VALVE 3 (DRY)
VALVE (HOT)
4
• Rating : 240V 50Hz
• Resistant : 3.5~4.5kΩ
1 Open the door completely.
2 Remove the three screws from the hinge.
When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.

Removing method of remained water

Pull it out from hose.
First, prepare a bucket to put in the remained
water.
41
GY/WH - BK
WH/BK - BK
YL/BK - BK
BK/WH - BK