Black & Decker EPC12 User Manual

Black & Decker EPC12 User Manual

Hide thumbs Also See for EPC12:




Table of Contents

Summary of Contents for Black & Decker EPC12

  • Page 1 EPC12 EPC14 EPC18 EPC96...
  • Page 2 English (Original instructions)
  • Page 5: Intended Use

    Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker drill/screwdriver has been designed for sense when operating a power tool. Do not use a power screwdriving applications and for drilling in wood, metal and tool while you are tired or under the influence of drugs, plastics.
  • Page 6 Before drilling into walls, floors or ceilings, check for the maintained power tools. location of wiring and pipes. f. Keep cutting tools sharp and clean. Properly Avoid touching the tip of a drill bit just after drilling, as it maintained cutting tools with sharp cutting edges are less may be hot.
  • Page 7 4. Chuck The charger automatically shuts off if the ambient 5. Battery temperature becomes too high. The thermal cut out 6. Battery release button operates only once and then requires complete replacement. fig. C & D 7. Charger The charger automatically shuts off if the ambient 8.
  • Page 8: Charging The Battery

    Selecting the direction of rotation Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual For drilling and for tightening screws, use forward (clockwise) risks can not be avoided. These include: rotation. For loosening screws or removing a jammed drill bit, Injuries caused by touching any rotating/moving parts.
  • Page 9: Protecting The Environment

    Unplug the charger before Technical data cleaning it. Regularly clean the ventilation slots in your tool and EPC12 (H1) EPC14 (H1) charger using a soft brush or dry cloth. Voltage 14.4 Regularly clean the motor housing using a damp cloth.
  • Page 10: Ec Declaration Of Conformity

    Voltage No-load speed 0-750 0-750 Max. torque Nm 12.1 10.4 Chuck capacity mm 10 EPC12/EPC14/EPC18/EPC96 Max drilling capacity Steel mm 10 Black & Decker declares that these products described under Wood mm 25 "technical data" are in compliance with: Battery...
  • Page 11 Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
  • Page 14 TYP. EPC96 - EPC12 - EPC14 - EPC18 Partial support - Only parts shown available Nur die aufgefuerten teile sind lieferbar Reparation partielle - Seules les pieces indiquees sont disponibles Supporto parziale - Sono disponibili soltanto le parti evidenziate Solo estan disponibles las peizas listadas...
  • Page 15 ENGLISH Do not forget to register your product! Register your product online at or send your name, surname and product code to Black & Decker in your country.
  • Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...

This manual is also suitable for:


Table of Contents