Avoid body contact with earthed or grounded EGBL144/ EGBL180 surfaces such as pipes, radiators, ranges and CORDLESS DRILL refrigerators. There is an increased risk of electric shock Technical data if your body is earthed or grounded. EGBL144 EGBL180 c. Do not expose power tools to rain or wet conditions.
4. Power tool use and care 6. Service a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do person using only identical replacement parts. This will the job better and safer at the rate for which it was ensure that the safety of the power tool is maintained.
Charge only at ambient temperatures between 4 °C and plate. Never attempt to replace the charger unit with 40 °C. a regular mains plug. Charge only using the charger provided with the tool. If the supply cord is damaged, it must be replaced by the When disposing of batteries, follow the instructions given manufacturer or an authorised Black &...
battery is either fully charged or too hot and cannot be Open the chuck as far as possible. charged. If this happens, remove the battery from the charger, Remove the chuck retaining screw by turning it clockwise let the battery cool down for approx. 1 hour and re-insert it. using a screwdriver.
Protecting the environment Switching on and off Variable speed switch Separate collection. This product must not be To switch the tool on, press the variable speed switch (1). disposed of with normal household waste. The tool speed depends on how far you press the switch. To switch the tool off, release the variable speed switch.
Australia Stanley Black & Decker Tel. 1800 444 224 82 Taryn Drive, Epping Vic, 3076, Australia New Zealand Stanley Black & Decker Tel. +0800 339 258 5 Te Apunga Place Mt Wellington, Auckland, New Zealand 90581605 05/2012...