DCT-21 HD Audio Center Operation Manual Operation Manual...
Page 3
DisclaiMers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
safety precautiONs Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. iNtrODuctiON The HD Audio Center is designed to allow multiple audio sources to be controlled, switched and output to a variety of audio equipment. With its 6 audio inputs (including an HDMI input) and 6 audio outputs (including a 6.3mm headphone output) you can integrate and convert any digital or analog audio source to any type of amplifier or active speakers.
4. systeM requireMeNts Input source equipment such as PC (USB) or DVD player with relevant connection cables and output to amplifier, active speakers or headphones 5. features Main • 6 Input, 6 Output HD Audio Center • 4 Digital Inputs, 2 Analog Inputs •...
Page 8
Misc • IR Remote with direct source, power and mute buttons • HDMI audio embedding or de-embedding • Volume control of analog and headphone outputs or just headphone output via remote or main control dial • Direct power and mute button on unit •...
6. OperatiON cONtrOls aND fuNctiONs 6.1 front panel MENU MENU 6.3mm headphone Output: Connect to 6.3mm professional headphone set for user to enjoy the individual professional audio sound. 3.5mm line-level input: Connect 3.5mm mini-jack cable to any audio equipment for stereo input audio signal. ir: IR receiver window.
6.2 rear panel COAX. COAX. HDMI OUT HDMI OUT DC 5V DC 5V OPT. OPT. XLR OUT XLR OUT XLR OUT XLR OUT HDMI IN HDMI IN Dc 5v: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.
6.3 top panel POWER MUTE pOwer: Press this button to switch on the device or set to standby mode. Mute: Press this button to mute or unmute the audio volume instantly. 6.4 remote control pOwer: Press the button to turn On or to set the device to standby mode.
6.5 OleD Menu 1st layer full NaMe 2ND layer source in hDMi in Source Selection usB in Optical in coaxial in line in (l/r in) front in return src set Bypass Sampling Rate Conversion Setup 192 khz 176.4 khz 96 khz 88.2 khz 48 khz 44.1 khz...
7. cONNectiON DiagraM headphones headphone Output frONt MENU MENU line-level input smartphone or Mp3 player Display Mac pc set-top Box cD player stereo analog input Digital audio input input hDMi Output rear COAX. COAX. HDMI OUT HDMI OUT DC 5V DC 5V power OPT.
Need help?
Do you have a question about the DCT-21 and is the answer not in the manual?
Questions and answers