Subscribe to Our Youtube Channel
Related Manuals for CYP DCT-4N
Summary of Contents for CYP DCT-4N
- Page 1 DCT-4N Stereo Analog to Dual Outputs Digital Converter (ADC) Operation Manual Operation Manual...
- Page 3 DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
- Page 4 SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
-
Page 5: Table Of Contents
CONTENTS 1. Introduction ..........1 2. Applications ........... 1 3. Package Contents ........ 1 4. System Requirements ......1 5. Features ..........1 6. Operation Controls and Functions ..2 6.1 Front Panel .........2 6.2 Rear Panel .........2 6.3 Left Panel ...........3 6.4 Top Panel ...........3 7. -
Page 6: Introduction
1. INTRODUCTION The Stereo Analog to Dual Outputs Digital Converter (ADC) is designed to convert analog stereo audio to Coaxial and TOSLINK Optical digital outputs. The digital output is 2 channels uncompressed LPCM with a sampling rate of 48 kHz. Both Optical and Coaxial cables connected to the output ports of the unit can run up to 5 meters while still providing a reliable and lossless audio signal transmission. -
Page 7: Operation Controls And Functions
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel L - IN - R L/R IN: Connect this input to the stereo output of an audio streamer, AV receiver, LCD TV, or DVD player, using stereo RCA cables. 6.2 Rear Panel COAX-OUT-OPTICAL COAX OUT: Connect this output to the Coaxial input of an audio equipment such as an amplifier or A/V receiver, using a... -
Page 8: Left Panel
6.3 Left Panel DC 5V DC 5V: Plug 5V DC power supply into the unit and connect the adaptor to AC wall outlet. 6.4 Top Panel ANALOG TO DIGITAL AUDIO CONVERTER POWER LED: The LED will illuminate when the power is connected. -
Page 9: Connection Diagram
7. CONNECTION DIAGRAM DVD Player Analog Stereo Input Power Supply Digital Audio Digital Audio Output (Coaxial) Output (Optical) AV Receiver AV Receiver... -
Page 10: Specifications
8. SPECIFICATIONS Input Ports 1×Analog Stereo (RCA connectors) Input Format Analog Stereo 2 CH Output Format LPCM 2 CH Output Sample Frequency 48 kHz Output Ports 1×Coaxial 1×Optical (TOSLINK connector) Output SNR >90 dB Output THD+N < 0.01 % at 1 kHz Output Frequency <... -
Page 11: Acronyms
9. ACRONYMS ACRONYM COMPLETE TERM Analog to Digital Converter LPCM Linear Pulse Code Modulation Audio Connector (Radio Corporation of America) TOSLINK Toshiba Link... - Page 12 CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.tw MPM-DCT4...
Need help?
Do you have a question about the DCT-4N and is the answer not in the manual?
Questions and answers