Digital to analog audio convertor with dsp function (13 pages)
Summary of Contents for CYP DCT-39
Page 1
DCT-39 Compact Digital Audio Processor with De-pop, Volume Adjustment and SRC Functions Operation Manual Operation Manual...
Page 2
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
Page 3
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION The digital audio processor is designed to allow optical or coaxial LPCM audio source input and convert to different sampling rates up to 192kHz/24bits. The digital audio processor utilizes DSP engine instead of software process to prevent distortion. The converted audio source signal could be output to both optical and coaxial audio signals simultaneously.
5. FEATURES • Supports coaxial and optical digital audio input • Supports Non-LPCM pass through • Supports coaxial and optical audio output simultaneously • Supports LPCM input sampling rates up to 192kHz • Supports to convert sampling rate of input audio source. The maximum sampling rate up to 192kHz/24 bits •...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front and Rear Panels Front Rear SERVICE OPTI. OUT COAX OUT COAX IN OPTI. IN COAX IN: Connects the coaxial audio source. Just plug in coaxial audio source here. OPTI. IN: Connects the optical audio source. Just plug in optical audio source here.
6.3 Side Panel FUNC. FUNC: Function key provides modes selections. There are three modes available. a. Volume Mode: The default setting sets at volume mode. The volume could be adjusted once under this mode and the VOL indicator will illuminate. The mode will automatically switch back to this mode once switches to input sampling frequency mode or output sampling frequency mode after four seconds and not active them.
7. CONNECTION DIAGRAM DVD or Blu-ray Player Digital Coaxial Digital Optical Audio Input Audio Input Power Supply COAX IN OPTI. IN SERVICE OPTI. OUT COAX OUT Digital Optical Digital Coaxial Audio Output Audio Output AV Receiver and Speakers...
8. SPECIFICATIONS Input Ports 1×Coaxial, 1×Optical Output Ports 1×Coaxial, 1×Optical Power Supply 5 V/2.6 A DC (US/EU standards, CE/FCC/UL certified) ESD Protection Human body model: ±8 kV (air-gap discharge) ±4 kV (contact discharge) Dimensions 50 mm (W)×85 mm (D)×22.5 mm (H)/ Jack Excluded 51 mm (W)×98 mm (D)×22.5 mm (H)/ Jack Included...
Need help?
Do you have a question about the DCT-39 and is the answer not in the manual?
Questions and answers