Page 1
DCT-15 USB Audio Converter with Optical Operation Manual Operation Manual...
Page 3
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
Page 4
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION The USB Audio Converter with Optical will convert a digital audio signal to analog whilst simultaneously outputting a digital audio signal. It has USB and Optical inputs and is designed to be powered by the USB connection. This optical output can also be linked to an amplifier or sound system that has an Optical S/PDIF input, whilst the analog output can be connected to a display or to an active speaker system to simultaneously output stereo audio.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel Power Mini USB In Optical In Power LED:The LED will illuminate red when the device is connected to an active power supply. Mini USB In: Connect to a USB audio source such as a PC/Laptop for audio conversion or to a power supply with a MiniUSB cable.
7. CONNECTION DIAGRAM PC/Laptop DVD or Blu-ray Player Digital Optical USB Input Input Power Mini USB In Optical In Digital Analog Optical Stereo Output Output AV Receiver Active Speakers...
Need help?
Do you have a question about the DCT-15 and is the answer not in the manual?
Questions and answers