Power-On Messages - Beam Iridium PotsDOCK 9555 Installation & User Manual

Power-On Messages

Once your phone is powered on, you may see:
Searching...
Registering...
Check Signal
Invalid Account
Enter Phone
Unlock Code
Enter PIN
Insert Card
Check Card
Blocked
! Blocked
Bad Card See
Supplier
Busy Try Later OR
Please Try Later
Restricted Area
Redial?
38
MESSAGE DESCRIPTION
Your phone is attempting to establish
communications with the satellite
network.
Your phone is registering with the
network. When the process is complete, you
will see Registered.
Your phone is unable to establish
registration with the satellite network.
Move to a location with a clear
unobstructed view of the sky.
Contact your service provider.
Your phone was locked after the last use.
Enter your four-digit unlock code and press
OK to proceed.
Enter the four- to eight-digit SIM card PIN
code provided by your service provider and
press OK to proceed.
Power off your phone, make sure your SIM
card is inserted completely, and then power
your phone on again.
The SIM card is damaged or inserted the
wrong way.
If the SIM card PIN code is incorrectly entered
three times in a row, your phone becomes
blocked. Use **05* to proceed to enter the
PUK code. Contact your service provider for
further details.
If the SIM card PIN2 code is incorrectly
entered three times in a row, some features
(e.g. Fixed dialling) become blocked. Contact
your service provider for further details.
Your SIM card has been damaged or incor-
rectly issued. Contact your Service Provider
for information.
The phone is unable to access the
network. Try again in a few minutes.
The phone is unable to access the
network. Move to an area where calls are
allowed.
Press OK to redial the number
automatically.