Amped Wireless SR300 User Manual page 47

SR300
been reestablished by viewing a website. If you do not have a connection, logon to
http://setup.ampedwireless.com
d. Check to see that your home Wi-Fi router is still on. If it has been turned off please turn it back on. The
Range Extender should automatically reconnect to your Home Network within 10 minutes.
I have a dual-band router and I cannot extend it.
a. Log into the Web Menu for your dual-band Wi-Fi router and adjust the Wi-Fi settings. Change the Wi-
Fi band to 2.4GHz single band mode only. The Range Extender will not be able to extend the 5GHz band.
I cannot find any Wi-Fi networks (Home Networks) to extend.
a. The Range Extender may be out of range. Move the Range Extender closer towards the Wi-Fi router
and try the Setup Wizard again from the Web Menu.
b. The antenna on your Range Extender may be loose. Tighten the antenna connection and try again.
c. The Wi-Fi Home Network may not be a compatible Wi-Fi network (802.11b/g/n).
USER'S GUIDE
and configure a new Home Network connection.
46