Download  Print this page

Amped Wireless SR20000G Setup Manual

Hide thumbs
   

Advertisement

SETUP GUIDE
High Power Wireless-N 600mW Gigabit
Dual Band Range Extender
Find an optimal setup location between your wireless router and
1
your wireless dead zone
RECOMMENDED
SIGNAL STRENGTH
>70%
2.4GHz and 5.0GHz
(if available)
Single or Dual Band
Wireless Router
Internet
Home/Office Network
IMPORTANT:
2
Connect your Mac or PC to the Range Extender
Attach the two included antennas.
Attach the Power Adapter to the Range Extender's
Connect to the Range Extender's Wi-Fi network: Amped_Rep_2.4GHz or Amped_Rep_5.0GHz
Connect to the Range Extender's Wi-Fi network:
(See back for operating system specific instructions.)
(See back for operating system specific instructions.)
Attention Windows Users:
A prompt may appear asking: "Do you want to set up your network?"
If so, select "Connect to the network without setting it up" or
"No, just connect".
3
Open your web browser
Recommended browsers: Google Chrome, Safari or Internet Explorer (8.0 and up). Do not use Firefox.
ACCESSING THE WEB MENU DOES NOT REQUIRE INTERNET ACCESS. THE MENU IS SERVED FROM THE RANGE EXTENDER.
a) Disconnect your PC from all Wi-Fi networks.
b) Attach an Ethernet cable between the PC and the Range Extender.
c) Open your web browser and go to http://setup.ampedwireless.com again.
4
Welcome to the Dashboard
5
Scan for a Home Network to Extend
6
Home Network Security Settings (if necessary)
7
Configure Settings for your Extended Networks
8
Connect to the new Extended Network
9
Setup Summary
R E A D
RECOMMENDED
PLACE THE RANGE EXTENDER IN A LOCATION WHERE IT
SIGNAL STRENGTH
CAN RECEIVE A STRONG SIGNAL FROM YOUR WIRELESS ROUTER
>70%
This can be done before or after setup is complete. The Range Extender will save your settings.
2.4GHz and 5.0GHz
(if available)
If you are connecting to a dual band router, both 2.4GHz and 5.0GHz connections should be greater than 70%.
IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU...
F I R S T
Dead Zone
port and an available power outlet.
PWR
Amped_Rep_2.4GHz
Amped_Rep_5.0GHz
Enter the setup web address into your browser:
http://setup.ampedwireless.com
If the URL fails to open try: http://192.168.1.240
The Dashboard will provide you with the current
status of the Range Extender.
Click
Scan
Highlight and select the wireless network(s)
that you wish to repeat. If you have a dual band
router, select BOTH the 2.4GHz and 5.0GHz
network names.
>70%
If you are connecting to a 2.4GHz and a 5.0GHz
network, BOTH networks must have greater than
70% signal strength.
Click
Next
If you do not see your desired wireless networks,
move the Range Extender closer to the router and
scan again as it may be out of range.
If your wireless home network(s) has security
enabled, you will need to enter the security
key here. If you selected a dual band network
to repeat, you will need to enter both security
keys here.
If your wireless home network(s) does not have
security enabled, leave the security field blank.
Click
Next
The IDs of your Extended Networks are:
Amped_Rep_2.4GHz
If you choose to "Clone" the settings from your
Home Network, the wizard will copy the SSID
and security key of your Home Network.
The SSID of the Extended Network will have a
"_RE" at the end of its name. For example:
Home_Network_RE
You can also manually enter a new network ID
and security key. The new security key must be
at least 8 characters long.
Click
Next
DO NOT LEAVE OR REFRESH THIS PAGE
Allow the countdown to complete and the wizard
will automatically redirect you to the next step.
During the countdown process, the Range
Extender will reboot and disconnect the Wi-Fi
connection. At this point, you will need to
reconnect your PC or tablet to the new
Extended Network. You may connect to either
the 2.4GHz and 5.0GHz Extended Network.
Follow the instructions on the screen to
connect.
Once you have connected, click the check box
to confirm. The
allowing you to complete the setup process.
If there are problems with your configuration, the
setup wizard will inform you to rescan for a network
to extend.
If there are no problems, you will see the Setup
Summary page below.
Congratulations, the Range Extender is now
successfully configured. Your settings are now
saved.
If you haven't already positioned your Range
Extender in an optimal location, you may do so
now. All Range Extender settings are saved and
can be safely powered off for relocation.
You may also attach any wired network devices
to the wired ports on the back of the Range
Extender.
If you experience any problems during this process,
please contact Amped Wireless Elite Support:
Phone:
Email:
Web:
?
Need Help? Give us a call.
Phone: 888-573-8820
Email: techsupport@ampedwireless.com
Web: www.ampedwireless.com/support
SR20000G
Dual Band Range Extender
Network Bridge
5
Amped_Rep_2.4GHz
Amped_Rep_5.0GHz
- or -
to find available networks to extend.
Recommended Signal
Select the wireless network with
a signal strength greater than 70%
for the most reliable connection.
Connecting to a weak signal may result in
slower speeds or intermittent connectivity.
to continue.
to continue.
and
Amped_Rep_5.0GHz
to apply the settings.
Next
button will appear
888-573-8820
techsupport@ampedwireless.com
www.ampedwireless.com/support
Rev 1.1
Connect up to
G I G A B I T
wired devices
PCs/Laptops
Network Storage
A/V Devices
and more!
v053013

Advertisement

loading

  Also See for Amped Wireless SR20000G

  Related Manuals for Amped Wireless SR20000G

  Summary of Contents for Amped Wireless SR20000G

  • Page 1 You may also attach any wired network devices to the wired ports on the back of the Range Extender. If you experience any problems during this process, please contact Amped Wireless Elite Support: Phone: 888-573-8820 Email: techsupport@ampedwireless.com Web: www.ampedwireless.com/support...
  • Page 2 Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support Amped Wireless A Division of Newo Corporation Copyright © 2014 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation. v050514...