Management; Upnp - AirTies Air 4420 User Manual

3. The same Mesh settings should be made on all the AirTies access points
selected above. You can find detailed information about Mesh settings
for access point devices in their user manuals.
Important: All AirTies devices that form the Mesh Network should operate on
the same channel.
4. From the MANAGEMENT menu you can configure how the device is
3.3

Management

managed.
5.
6.
To change the password used to protect the Web UI. Select Password
Settings.
Enter the current password and the new password twice. Select Save to save
your settings. The new password will be required next time you access the
device settings. AirTies Network Assistant will also request this password to
allow for the device to be monitored and managed.
To allow remote management from the Internet select Remote Management.
Please note that allowing remote management should only be performed by
experienced users. To enable remote management of your device, first click the
"Enable Remote Management" check box. If you check the "Any IP" box, your
router can be managed remotely from any computer that has a WAN IP.
If "Any IP" is not checked, you have to add the WAN IP address of the computer
from which you would like to remotely manage your device to the "IP Access
List". To do this, enter the WAN IP address in the "New IP Address" field and
click the "Add" box.
After saving, the WAN IP address you have entered will appear in the "IP
Access List". If you select this address from the list and click "Save", remote
management will be activated for this address. If you want to remove an IP
address from the list, select the address from the list, click on the "Delete"
checkbox and then click "Save".
You can also specify which services will be available to the remote management
computers on this page.
3.4

UPNP

Universal Plug and Play is a protocol that allows devices on the network
automatically interoperate with each other. To enable UPnP port forwarding
select UPNP Settings under the UPNP menu.
22