AirTies Air 4420 User Manual

AirTies Air 4420 User Manual

Wireless kit / wireless network extender
Hide thumbs Also See for Air 4420:

Advertisement

USER
MANUAL
Air 4420
Wireless Kit / Wireless Network Extender
AirTouch
Kablosuz yaşam
24/7 people support
0845 557 5782
(from United Kingdom)
+90 212 444 0239
(International)
Three yea

Advertisement

Table of Contents
loading

Summary of Contents for AirTies Air 4420

  • Page 1 Kablosuz yaşam Wireless Kit / Wireless Network Extender USER MANUAL AirTouch 24/7 people support Three yea 0845 557 5782 (from United Kingdom) Air 4420 +90 212 444 0239 (International)
  • Page 2: Table Of Contents

    MAC Filtering Back Panel 3.2.5 AirTies Mesh Settings Main Features Management INSTALLATION UPNP Cabling USB Devices Setup Media Server Advanced setup using AirTies Network Tools Assistant 3.7.1 Firmware Update 2.3.1 Installation 3.7.2 Time Setting 2.3.2 Running Report AirTies Network Assistant 3.8.1...
  • Page 3: Manual Overview

    +90 212 444 0 239 Lifetime enjoyment Ethernet port to setup a wireless local network and enable wireless computers Quick Installation Guide to access the Internet. Warranty Card As a repeater, the Air 4420 makes it possible to extend the coverage area of a...
  • Page 4: Front Panel

    For Air 4420 Front Panel 1. One Air4420 2. One 12V Power Supplies 3. One Ethernet Cables 4. One Easy Setup CD 5. One Quick Installation Guide 6. One Warranty Card and Certificate of Compliance LIGHT STATUS Power Blue The device is ON...
  • Page 5: Back Panel

    Make sure your gateway is turned on. Cabling Using the black Ethernet cable, connect the other Air 4420 to your TV, set-top box or games console. Connect the power adapters inside the box to the power sockets of each Air 4420 and plug into electric sockets.
  • Page 6: Assistant

    During AirTies Network Assistant installation your AirTies device will be setup and configured. Insert the CD that came with your AirTies device into the CD ROM drive of your PC, after a few seconds the animation will run (see below).
  • Page 7 During AirTies Network Assistant installation your AirTies device will be setup and configured. Insert the CD that came with your AirTies device into the CD ROM drive of your PC, after a few seconds the animation will run (see below).
  • Page 8: Running

    If you want to exit AirTies Network Assistant then you must right click the AirTies logo in the notification area and select “exit”. If AirTies Network Assistant is not running and you want to run it then you must select the AirTies Network Assistant application from the start menu under All...
  • Page 9: Network Display

    Each AirTies product will be displayed with their image on the network map. Non AirTies devices will be displayed with a generic image. It is not possible to manage non AirTies devices but the network can still be displayed on AirTies Network Assistant.
  • Page 10: Change Node Name

    For example, a games console may show on the network map as an IP address like 192.168.2.55 but can be renamed to be “games console 1”. The properties can be displayed for each device. Properties for AirTies devices The wireless settings of the device can be changed: 2.3.5...
  • Page 11: Usb Status

    If new firmware is discovered then the firmware on the device will be updated. For the local PC there is a software upgrade option instead of firmware upgrade. This will check for any newer versions of AirTies Network Assistant and update 2.3.8...
  • Page 12: Usb Host

    2.3.10 USB Host If a USB disk is attached to your AirTies device then a USB drive icon will Click Next to install the printer. appear next to your AirTies device on the network map.
  • Page 13: Troubleshooting

    2.3.11 Troubleshooting AirTies Network Assistant automatically detects problems on the home network and attempts to solve this issues with the Troubleshooting application. When the connection between the PC and gateway or between the PC and Internet is cut off then the network map shows the network link with a cross, to indicate that that there is a problem: Clicking on the red cross initiates the troubleshooting application.
  • Page 14: Adding Airties Devices

    192.168.2.154. 2.3.12 Adding Settings network map. If the new device is an AirTies device then the user s prompted to register the device. AirTies Devices You can configure the IP and DHCP Settings of your device, from the IP and DHCP Settings submenu under the LAN menu.
  • Page 15 Enable DHCP Server The DHCP Type can be changed as follows: DHCP Server DHCP Relay Agent DHCP Client Disable DHCP ( Off ) DHCP Server mode configures the device to assign IP addresses to connecting devices. There must only be one DHCP Server on the network, which in most cases will be the router.
  • Page 16: Lan Clients

    Enable DHCP Relay Enable DHCP Client Agent DHCP client mode configures the device to obtain an IP address from a DHCP server on the network. To enable DHCP client select DHCP Client. Click Save to save your settings. DHCP relay makes it possible for a DHCP server on a different network to assign local IP addresses to clients connected to your device.
  • Page 17: Vlan Configuration

    You can see the IP addresses that are reserved in the “Static Addresses” A list of VLANs will be shown. By default there will be a single VLAN named table. “Dynamic Addresses” table shows the IP addresses assigned but not VLAN 1.
  • Page 18: Port Configuration

    Click Save to save your changes. Using your AirTies device as a wireless access point, you can set up a wireless Wireless hotspot with a range of up to 400 meters outdoors and 100 meters indoors.
  • Page 19: Wireless Security Settings

    MAC Address Filtering allows you to control which network cards can connect data transfer rate based on distance and signal quality. to the AirTies device and share your Internet access. For your wireless network security, it is recommended that both MAC Address filtering and WPA2 wireless encryption protocols be activated.
  • Page 20: Mac Filtering

    Save. 13 ASCII characters for 123-bit encryption. Your AirTies device supports 802.1x Authentication protocol as well. For detailed information about how to setup 802.1x security, please check the You can enter up to 4 network keys and choose the one you want to use.
  • Page 21: Airties Mesh Settings

    AirTies Mesh Technology resolves weak wireless signal and coverage area problems often encountered in multi-story concrete buildings. To extend wireless coverage area, it is necessary to use AirTies access point devices functioning in repeater mode. The access points function as repeaters and communicate with each other via a special protocol that maintains the signal strength over long distances and through barriers such as concrete walls.
  • Page 22: Management

    The same Mesh settings should be made on all the AirTies access points selected above. You can find detailed information about Mesh settings for access point devices in their user manuals. Important: All AirTies devices that form the Mesh Network should operate on the same channel.
  • Page 23: Usb Devices

    Air 4420-TV products contain a Media Server. The Media Server will share videos, music and photos from a USB disk attached to the Air 4420’s USB port. Media can be viewed on a DLNA / UPnP AV compatible Media Player by locating the media server named Air4420 and browsing and playing the contents.
  • Page 24: Tools

    You can check for updates by clicking Check For Updates Now. The device will contact AirTies to see if there are updates. If there are updates then they will The REPORT menu displays information about the main characteristics of your be downloaded and the device will upgrade.
  • Page 25: System Logs

    3.8.2 Log Settings Log Settings screen allows you to set detail levels for application logs. You can also specify a remote logging destination. The System Logs under REPORT menu displays detailed system logs about 3.8.1 System Logs the system activity and the applications that were active since the device last started.
  • Page 26: Technical Properties

    TECHNICAL • PHYSICAL Ports: Power (12V DC), 1 x 10/100 Ethernet(RJ-45, auto MDI/MDIX), USB • Dimensions: 90mm x 70mm x 20mm • Connection protocols: PPPoE, RFC1483 Bridging, RFC1483 Routing, PROPERTIES CHARACTERISTICS • Weight: TBDg • Router and Firewall: Advanced Anti-DoS SPI Firewall; IP and MAC address •...
  • Page 27 AirTouch 7/24 people support Three year warranty +90 212 444 0 239 support Three year warranty 4 0 239 24/7 people support Three year warranty 0845 557 5782 (from United Kingdom) +90 212 444 0239 (International) Visit www.airties.com for full list of technical support telephone numbers.

This manual is also suitable for:

Air4420-tvAir4420-stbAir4420-ga

Table of Contents