Port Configuration; Wireless Settings; Connecting To Your Device; Wireless Network Settings - AirTies Air 4420 User Manual

3.1.4 Port
Tags can be configured on each port to allow data to be separated to different
VLANs.
Configuration
Select Port Configuration from the LAN menu.
For each port the tagging can be configured to add or remove a VLAN tag. Data
can also be filtered based on untagged and unregistered frames. Click Save to
save your changes.
Using your AirTies device as a wireless access point, you can set up a wireless
3.2 Wireless
hotspot with a range of up to 400 meters outdoors and 100 meters indoors.
Settings
With the N wireless technology you can set up a 300Mbps wireless network.
Additionally, your device is backward compatible with the 802.11b/g standard.
By using clients and access points that support 802.11n, you can achieve
wireless transfer rates of up to 300 Mbps. Additionally, the MIMO mode
supported by the 802.11n standard gives you a much broader wireless range
than 802.11b/g devices.
Your device has wireless networking enabled by default. No additional
3.2.1 Connecting to
configuration is needed for your wireless computers to access the Internet.
your device
However, it is recommended that you configure wireless security as explained
in the sections that follow.
In order to connect your laptop to the AirTies device wirelessly:
If using Windows XP go to Start > Control Panel > Network Connections >
Wireless Network Connection > View Wireless Networks. On the Wireless
Network Connection screen, select the wireless network named AirTies_
Airxxxx and click Connect.
If using Windows 7 or Vista go Start > Control Panel > Network and Sharing
Center > Manage Wireless Networks > Connect to a network. Select the
wireless network named AirTies_ Airxxxx and click Connect.
3.2.2 Wireless
From Advanced Settings in AirTies Network Assistant, when you click the
WIRELESS menu, you will be in the Wireless Connections screen that lists all
Network Settings
the wireless clients connected to the AirTies device, grouped by wireless SSID.
•
The
wireless feature of your device. By default this is enabled.
Go to Wireless Settings under the WIRELESS menu to configure your wireless
network.
•
In the
5Ghz.
•
In the
operate in.
Wireless Network Active box lets you enable or disable the
Frequency field you can choose whether to use 2.4Ghz or
Mode field, you can choose the wireless mode the device will
18