AirTies Air 4920 Self-Installation Manual

At&t smart wi-fi extender

Hide thumbs Also See for Air 4920:

Download this manual

AT&T Smart Wi-Fi

Self-installation Guide

Existing Wi-Fi Gateway

Some home sizes and layouts

create dead zones that can't be

reached by a single Wi-Fi Gateway

Get started

These instructions will guide you through the process of installing your Wi-Fi Extender.

AT&T Internet service must be active and connected prior to adding your Wi-Fi Extender.

In the box:

Please allow at least 10-15 minutes for installation.

Yellow Ethernet cable

Extender

Wi-Fi Extender

Wi-Fi Extenders provide additional

coverage for those hard-to-reach

areas of your home

Power cord

Airties_Guide

3/17

ATT170820943-2

Page 1 AT&T Smart Wi-Fi Extender ® Self-installation Guide Wi-Fi Extender Wi-Fi Extenders provide additional coverage for those hard-to-reach Existing Wi-Fi Gateway areas of your home Some home sizes and layouts create dead zones that can’t be reached by a single Wi-Fi Gateway Get started Please allow at least 10-15 minutes for installation.
Page 2 Introduction How do you know if the Extender is working? The AT&T Smart Wi-Fi Extender provides reliable wireless coverage to more areas of your home. Your Extender creates a seamless · When pairing is complete, both LEDs will turn solid green network.
Page 3 Having trouble? • If your Wi-Fi Extender displays a red light, it likely has a bad connection or is too far from your existing Wi-Fi Gateway. Move the Extender closer to your Wi-Fi Gateway. This provides a stronger signal. • If your Wi-Fi Extender has both LEDs flashing green every 5 seconds, it is ready to be paired. Place your Extender close to your Gateway and press the WPS button on the front of your Wi-Fi Gateway, then the WPS button on the Extender.