Enable DHCP Relay
Agent
DHCP relay makes it possible for a DHCP server on a different network to
assign local IP addresses to clients connected to your device. To enable this,
the address of the device (modem, server etc) that runs the DHCP service
needs to be known.
If DHCP Relay is enabled the DHCP server on your device is disabled and cannot
assign IP addresses to clients.
To configure DHCP Relay Agent select DHCP Relay Agent and enter an IP
address for the device, DHCP Server name and address of the DHCP Server.
Click Save to save your settings.
Enable DHCP Client
DHCP client mode configures the device to obtain an IP address from a DHCP
server on the network. To enable DHCP client select DHCP Client. Click Save
to save your settings.
If the device is configured as a DHCP server then you can see a list of all the
2.1.2
LAN Clients
clients connected to the device. Select LAN Client under the LAN menu of the
Web Interface. Through this menu, you can also reserve an IP address for a
client. When an IP address is reserved for a client, it cannot be assigned to any
other client. Whenever the client connects to the router, it gets the IP address
reserved for it. Click the reserve button next to a dynamic address to reserve
this as a static address.
16