Setting Mode; Changing The Frequency Step; Changing The Fast Frequency Step - AOR AR-Mini Operating Manual

SETTING MODE

Changing the Frequency
Step
This setting is used when changing
the step. At initial, a step is set
automatically depending on each band.
1
Hold down the FUNC key and
press the dial knob to enter the
setting mode.
2
Turn the dial knob to set the
setting mode number 00.
3
Hold down the FUNC key and turn
the dial knob to select the desired
step.
4
To return the original display, press
the dial knob or V/M key.
Tips:
9 kHz step can be set at AM mode
only. 8.33 kHz step can be set in air
traffic control band.
Changing the Fast
Frequency Step
This setting is used when changing the
fast step. The fast step is available by
holding down the FUNC key and turning
the dial.
1
Hold down the FUNC key and
press the dial knob to enter the
setting mode.
2
Turn the dial knob to set the
setting mode number 01.
3
Hold down the FUNC key and turn
the dial knob to select the desired
fast step.
• The fast step can be set as follows;
10 kHz, 100 kHz, 1 MHz, 10 MHz
and 100 MHz
(The default setting is 1 MHz)
4
To return the original display, press
the dial knob or V/M key.
Tips:
We recommended that select
AUTO to prevent excessive battery
consumed.
51