AOR AR-Mini Operating Manual page 20

PREPARATION AND BASIC USAGE
Note:
AR-mini has been set Auto step and
Auto reception mode functions at
initial. These functions change the
frequency step and reception mode
automatically depending on the
band. They can be canceled and set
them manually.
5
Press the dial knob, and turn it to
adjust the volume.
• The Volume is changed by turning
the dial knob as follows;
00 ➝ 01 ➝ (01) ➝ (01) ➝ 02 ➝
(02) ➝ (02) ➝ 03 ➝ (03) ➝ (03) ➝
04 ➝ (04) ➝ (04) ➝ 05 ➝ ····· ➝ 10
Note:
The displayed volume value is not
changed during 2 steps, however
the volume is changed.
20
6
Press the dial knob again, and the
turn it to adjust the squelch.
• The Squelch level is changed by
turning the dial knob as follows;
• Increase direction (Clockwise)
00 ➝ 01 ➝ (01) ➝ 02 ➝ (02) ➝ 03
➝ (03) ➝ 04 ➝ (04) ➝ 05 ➝ (05)
➝ 06 ➝ 07 ➝ 08 ➝ 09 ➝ 10
• Decrease direction
(Counterclockwise)
10 ➝ 09 ➝ 08 ➝ 07 ➝ 06 ➝ 05 ➝
(05) ➝ 04 ➝ (04) ➝ 03 ➝ (03) ➝
02 ➝ (02) ➝ 01 ➝ (01) ➝ 00
Note:
Some displayed squelch value is not
changed, however the squelch level
is changed.