If A Menu Screen Appears - Alpine IVA-D511E Owner's Manual

1
Touch [Source] on the main source screen.
The SOURCE selection screen is displayed.
2
Touch [Disc].
The display shows the DISC mode screen.
Insert a disc with the label side facing up. The unit starts to
play the disc.
When an optional Alpine DVD player is connected:
Insert a disc into the DVD/Video CD/CD player, the player
starts playing.
• The operation screen changes to the visual screen in the DVD or
Video CD mode for 5 seconds after an operation has been performed.
Touch the display panel to display the operation screen again.
• The display mode can be changed by touching [WIDE].
For operation, see "Switching Display Modes" on page 30.
To eject the disc
Press .
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• If the disc does not eject, press and hold
• Do not insert discs containing maps for the navigation system. Doing
so could result in damage.
• Refer also to "DVD Setup" (pages 31 to 36).
• Be sure the remote input lead is connected to the remote output lead
of this unit when a DVD changer or DVD player is connected. If not
correctly connected, touch operation cannot be performed.
• To return to the previous screen during Video CD playback, touch
[ ] after touching [P1/2] of the function guide. However, the
function may vary depending on the disc.
• If the disc is left in the unit after pressing
automatically pulled back into the unit and stopped. In this case,
start playback by touching [
disc within 15 seconds.
• "Can't Downmix" is displayed when a Downmix (multi-channel
signals are mixed into 2ch) prohibited section of a DVD-Audio disc is
played. In this case, only the Lch/Rch recorded on the disc is output
as sound. (The sound of Centre speaker, L-surround speaker,
R-surround speaker, and Subwoofer is not output.)
• While "Index reading" is displayed by DivX
fast-reversing and repeat functions, etc. cannot be used.
20
-EN
for at least 3 seconds.
, the disc is
/ ] or eject again and remove the
®
, the fast-forwarding/

If a menu screen appears

On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
• To play back a DVD-Audio disc, set "VCAP" in "Setting the DVD-
Audio Playback Mode" (page 35).
Direct Menu Operations
1 Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
Menu Operations
1 Touch [Control] to display the operation keys.
2 Touch [Key].
The menu operation mode will be displayed.
Touch [Return] to return to the previous display.
(Operation may not be possible, depending on the disc.)
3 Select a desired menu item by touching [ ], [ ], [ ] or [ ].
4 Touch [Enter] to confirm the selected item.