Table of Contents
Advertisement
Turn the Function Guide ON/OFF
(Function Guide Fade)
By setting to ON, the function guide will be hidden if no operation is
performed for 5 seconds in Radio source, USB source, etc. To display
the function guide, touch the screen slightly.
Setting item: Function Guide Fade
Setting contents: OFF/ON
• In DVD play mode, etc. the function guide will be hidden if there is
no operation for 5 seconds even if you set OFF.
Switching the Font Background Colour
You can choose from 4 different colours for the font background.
Setting item: Base Color
Setting contents: Blue/Red/Green/Amber
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: Screen Alignment
Setting content:
/ Reset
1 Touch the title bar of Screen Alignment.
The adjustment screen appears.
2 Accurately touch the
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
corner of the screen.
This completes adjustment, and returns to the Display
Setup mode screen.
• If you have touched a location other than the
to restore the adjustment screen to the initial setting.
• If you touch [
] on the adjustment screen, no adjustment is done
and the Display Setup screen is restored.
38
-EN
mark provided in the lower left
mark provided in the upper right
mark, touch [Reset]
Visual EQ™
Visual EQ Setting Operation
The following steps 1 to 4 are common operations to each
"Setting item" of Visual EQ setting. Refer to each section for
details.
1
After steps 1 and 2 in "Display Setup Operation"
(page 37) have been performed, touch the title bar of
Visual EQ.
Visual EQ screen appears.
2
Select a desired setting item by touching [ ] or [ ].
Setting items:
Live Contrast*
Visual EQ*
Contrast
Sharp*
User Memory*
* The setting is available in the visual source mode. (except navigation
screen)
3
Change the setting on the selected item by touching
its [ ] or [ ].
4
Touch [
] to return to the previous screen.
• Touching [Exit] will turn off the Display Setup screen, and return to
previous main screen.
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc. through the screen shown.
Adjusting Image Brilliance (Live Contrast)
The over brightness/darkness part of image will be adjusted to a proper
brilliance automatically.
Setting item: Live Contrast
Setting contents: OFF / Low / High
• You can adjust this setting in visual source mode by touching [
directly. (In this case, the "Live Contrast" is displayed as
"Contrast".)
Bright
Color*
Tint*
]
Hide quick links:
Advertisement
Table of Contents
