Table of Contents
Advertisement
c.
PIV (Protocol identifier valid)
"0":
"1":
d. Association
"00b": The IDENTIFIER field is associated with the addressed logical unit.
"01b": The IDENTIFIER field is associated with the target port that
"10b": The IDENTIFIER field is associated with the SAS target device that
"11b": Reserved.
e.
Identifier type
Indicates the Identifier type and the organization that has issued the
Identifier.
"0h":
"1h":
"2h":
"3h":
"4h":
"5h":
"6h":
"7h":
"8h":
f.
Identifier length
Indicates the Identifier length. Even when a value that is insufficient for
transferring all the Identifiers is specified for the Transfer Byte Length of the
CDB, this value indicates the actual byte length
g. IDENTIFIER for the logical unit
Indicates the device unique WWN.
C141-C012
The PROTOCOL IDENTIFIER field is invalid.
The PROTOCOL IDENTIFIER field is valid.
received the request.
contains the addressed logical unit.
No organization issues this Identifier (this is a Vender Specific ID)
The first eight bytes are the Vender ID(SPC-2 Annex C).
The rest of the data depends on the organization indicated in the
Vender ID.
Fujitsu recommends indicating the Product ID of the Standard
INQUIRY followed by the serial number of VPD Page 80.
Indicates a 64 bit long IEEE extended unique ID(EUI-64)
FC-PH, FC-PH3, FC-FS Name-Identifier.
Relative target port identifier.
Target port group.
Logical unit group.
MD5 logical unit identifier.
ASCII of IDENTIFIER
4.1 Control/Sense Commands
4-15
Advertisement
Table of Contents
