Cleaning The Carrier Sheet - Fujitsu ScanSnap S510 Getting Started Manual

5.4. Cleaning the Carrier Sheet

If the Carrier Sheet is used extensively, dirt and dust may
stick onto the surface or the interior and cause scanning
errors. Clean it regularly.
<Cleaning method>
Use a dry, soft cloth, or a soft cloth slightly moistened with
Cleaner F1 or a mild detergent to lightly clean off the dirt
and dust from the surface and the interior of the Carrier
Sheet.
Never use paint thinner or other organic
●
solvents.
Do not rub too hard. Otherwise, the Carrier
●
Sheet may be scratched or be deformed.
After cleaning the interior of the Carrier
●
Sheet with Cleaner F1 or a mild detergent,
dry the Carrier Sheet completely before
closing it.
As a guideline, it is recommended to replace
●
the Carrier Sheet every 500 scans.
Refer to "6.4. Purchasing the Carrier
Sheet" for details on purchasing a Carrier
Sheet.
24