Setting Up The Monitor; Attaching The Stand; Connecting Your Monitor; Connecting The Blue Vga Cable - Dell E1910H User Manual

Back to Contents Page

Setting Up the Monitor

Dell™ E1910H Flat Panel Monitor User's Guide
Attaching the Stand
Connecting Your Monitor
Removing the Stand Base
Attaching the Dell Soundbar (Optional)
Removing the Stand for VESA wall mount

Attaching the Stand

NOTE: The stand is detached when the monitor is shipped from the factory.
To attach the base of the stand to the monitor stand:
1. Place the monitor stand base on a stable table top.
2. Slide the monitor stand body in the correct direction down onto the back until it clicks into place.

Connecting Your Monitor

CAUTION: Before you begin any of the procedures in this section, follow the
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the blue display connector cable to the corresponding video port on the back of your computer.

Connecting the Blue VGA Cable

Safety Instructions.