Optica D104; D204M User Manual page 10

Additionally, users can change the IP Camera's network property, either DHCP
or Static IP directly in the device finding list. Refer to the following section for
changing the IP Camera's network property.
Example of Changing IP Camera's Network Property
Users can directly change an IP Camera's network property, ex. from static IP to
DHCP, in the finding device list. The way to change the IP Camera's network
property is specified below:
Step 1: In the finding device list, click on the IP Camera that you would like
to change its network property. On the selected item, right click and
select "Network Setup." Meanwhile, record the IP Camera's MAC
address, for future identification.
Step 2: The "Network Setup" page will come out. Select "DHCP," and press
"Apply" button down the page.
Step 3: Click on <OK> on the Note of setting change. Wait for one minute to
re-search the IP Camera.
Step 4: Click on the <Device Search> button to re-search all the devices. Then
select the IP Camera with the correct MAC address. Double click on
the IP Camera, and the login window will come out.
Step 5: Enter User name and Password to access the IP Camera.
Installing Optica Viewer Software Online
For the initial access to the IP Camera, a client program, Optica Viewer, will be
automatically installed to your PC when connecting to the IP Camera.
If the Web browser doesn't allow Optica Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
Section: Internet Security
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser. Right
click on the Information Bar and select <Install ActiveX Control...> to allow the
installation.
Settings) to continue the process.
9