Dell OptiPlex GX1 User Manual page 111

Expansion Cards: Dell OptiPlex GX1 Small-Form-Factor System User's Guide
4. Grasp the card by its outside corners, and ease it out of its connector.
5. If you are removing the card permanently, install a metal filler bracket over the empty card-slot
opening.
NOTE: You must install filler brackets over empty card-slot openings to maintain Federal
Communications Commission (FCC) certification of the system. The brackets also keep dust
and dirt out of your computer.
Replace the computer
6.
and turn them on.
NOTE: If Enabled, the
at the next system start-up:
ALERT! Cover was previously removed.
Back to Contents Page
file:///C|/infodev/2013/eDoc/OpGX1/UG/expcards.htm[2/21/2013 11:47:21 AM]
cover, and reconnect your computer and peripherals to their electrical outlets
Chassis Intrusion option will cause the following message to be displayed